Bowling along

Cyndi left a comment on my last post asking for an update on progress with all those bowls that I am working on. I 'm pleased to say that I have been busy, too busy to blog apparently, and they have now all made it through step two of the process. They have now all had the outside of the bowl turned, sanded and the decoration carved around the rim. Here they are, stacked in boxes in my gallery, the only space I seem to have available at the moment:-

As you can see, there is quite a range of sizes here, from 4" to 17" diameters. So whether you want a bowl to snack on peanuts while you watch tv, or a salad bowl for a big dinner party, I expect to have something soon that will suit your needs.

You have probably noticed that the very small bowls and the two large bowls in the picture above have had their inner surface turned and sanded too, which is the third step in the process. I did all the small bowls one day when I had the lathe set up for another job (a fridge door handle shaped like a rolling pin!) and while the chuck had a small set of jaws installed, I decided to go ahead and turn all the bowls that would need that setup. You see, I like spending my time turning wood, not fiddling with machinery.

The three big bowls had to be dealt with slightly differently in that they were big enough for me to screw them to a faceplate, skipping step one, and doing steps two and three at the same time. Here is the last of the of the big bowls which is on the lathe at the moment, ready for final sanding and carving the rim decoration. It is a whopping 17" diameter and 5" deep, one of the biggest bowls I ever made.

Death row at Seafoam

This month I have been doing little else but turn bowls. I had accumulated over one hundred roughed out bowl blanks and they were beginning to swamp my storage space, so I thought it would be a good idea to take advantage of this quiet time of year to get them turned into finished bowls.

Unfortunately they didn't all make the grade. A couple had split while drying; possibly I had left them too thick, and they weren't able to warp as they dried, and the stress caused them to split apart. Another was an error on my part and the bottom of the bowl was too thin - so thin in fact that it was translucent. So these three bowls ended up on death row:

It is a shame that these bowls didn't make the grade, and I hate to destroy them, but when you consider the total number of bowls that I am working on, I don't consider it a bad loss rate. Some woodturners might salvage these bowls by filling the cracks with epoxy and decorative materials, but most of my customers are looking for practical bowls that can be washed in the sink and will last a lifetime, so I use robust materials and only permit minor defects in the wood.

That is the pile of bowls which I am working on. They have been roughed out and left to dry, and then go back on the lathe four times before they are finished. In the picture above they have all had the first step completed. I have turned a recess on the inside of each bowl's rim. This will allow me to grip the bowl securely in a chuck so that I can shape the outside of the bowl.

I am working on these bowls step by step, putting all of them through step one before moving on to step two. This makes for more efficient working, since each step requires a different set up of the chuck, and a lot of time can be wasted changing the jaws, so while I have it set for one job, that is all I will do, even if it does take a week or more to get through them.

Winding down at Antigonish

This coming Saturday, December 22, will be your last chance to come visit me at Antigonish Farmer's Market until it re-opens again next spring. Dress warm though, because even with the space heaters, it is still very cold in the barn. Last Saturday moisture was freezing in the roof space and falling as showers of tiny snow flakes. But even so everyone was very cheerful and busy buying produce and gifts. One lady turned up with a basket of kittens looking for new homes and it wasn't long before they were all adopted. Not a bad way to get rid of kittens, but it would have been better if the mother had been fixed before the accident happened.

I have to say that I have been very pleased with both the way the market is run, and the support shown to me by the people of Antigonish, and I thank you all very much. It is very encouraging, and I will be looking at ways to show my wares at other markets around the province next year. The new market that is planned for Halifax looks very exciting in terms of its "green" construction. I hope that one day I might be able to show my work there. Here is a short video presentation outlining its construction:

Fall Schedule

Last weekend I started taking a booth at Antigonish Farmer's Market, and so far it has been very successful. Here is a picture of my set-up this weekend. The market is open for only three hours on a Saturday morning, so I built some new displays which are fast to set up and easy to fit in the car.

I have two craft shows coming up.

October 13/14, Hogmanay, in New Glasgow at North Nova Education Centre, which is in support of their music program.

November 17/18, Festive Craft Market, Langille Athletic Centre, Bible Hill, Nova Scotia.

I will be back at Antigonish on 20 and 27 of October, 9am- noon. I hope to be able to join them in November and December, but they haven't decided on a venue and there may not be space. So stay tuned news on that.

At other times I am usually in the studio and welcome visitors, but it is best to contact me before travelling to arrange an appointment in case I am out.

New work

I have been working on the third set in my Triplets series for several months. They are made from a block of really interesting elm which has some nice figure and huge area of bark inclusion. They turned out really nicely in the end, but the twisted grain of the wood made it a real pain to work with. I had to spend a lot more time than I wanted with a knife cleaning up cuts, texturing some surfaces with carving gouges, and sanding. I called this set The Bothersome Brothers.

But they surprised me by selling within a week of going on the shelf. I hadn't even had a chance to take proper photos of them, but their proud new owner was patient enough to let me take this shot before they left for their new home.

I have also started making pendants:


These particular ones are turned from various burl woods. They are strung on a soft nylon cord which is adjustable in length. They are selling very well and I am exploring other design options and ways of stringing them. I have some clasps and other stringing materials on order and look forward to trying them out. I also ordered some findings to make matching ear rings.

Stay tuned. I hope to be able to offer these from the website very soon.